欢迎访问功能高分子学报！

###

DOI:10.14133/j.cnki.1008-9357.2016.02.010

功能高分子学报:2016,29(2):207-212

查看/发表评论过刊浏览高级检索 HTML

←前一篇 | 后一篇→

码上扫一扫！

下载全文

通过自动加速效应的调控反应挤出制备聚甲基丙烯酸甲酯

刘伟兴, 李猛猛, 占鹏飞, 管涌, 郑安呐

(华东理工大学材料科学与工程学院, 上海先进聚合物材料重点实验室, 超细材料制备与应用教育部重点实验室, 上海 200237)

Preparation of PMMvia Reactive Extrusion by Regulating the Trommsdorff Effect

LIU Wei-xing, LI Meng-meng, ZHAN Peng-fei, GUAN Yong, ZHENG An-na

(Shanghai Key Laboratory of Advanced Polymeric Materials, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China)

摘要

图/表

参考文献

相似文献

本文已被：浏览 1379次下载 1295次
投稿时间：2016-04-04

中文摘要: 利用旋转流变仪、哈克转矩流变仪以及双螺杆挤出机,研究了剪切速率对自加速效应的影响,且通过反应挤出聚合制备了聚甲基丙烯酸甲酯(PMMA)。采用多检测凝胶渗透色谱(GPC)、动态力学分析(DMA)等方法,对聚合物结构和性能进行了表征。结果表明,在反应挤出聚合过程中,改变剪切速率可有效地调控自加速效应。通过新单体补加技术充分利用自加速效应,不仅可以提高聚合速率,而且可以获得高分子量、窄分子量分布的PMMA。制备的PMMA性能优于市售PMMA。

中文关键词: 自加速效应反应挤出聚甲基丙烯酸甲酯

Abstract:The effect of shear rate on the Trommsdorff effect was investigated by rotational rheometer,Haake torque rheometer and twin-screw extruder.Poly (methyl methacrylate) (PMMA)was prepared via reactive extrusion in a twin-screw extruder.The structure and properties of the PMMA were characterized by multi-detector Gel Permeation Chromatography (GPC) and Dynamic Mechanical Analysis (DMA),etc.Results indicated that the Trommsdorff effect could be effectively regulated by changing the shear rate in the process of reactive extrusion.The polymerization rate was increased by taking advantage of the Trommsdorff effect through adding new monomers.Meanwhile,PMMA had high molecular weight and narrow molecular weight distribution.The performance of obtained PMMA was better than commercial PMMA.

keywords: Trommsdorff effect reactive extrusion PMMA

文章编号： 中图分类号： 文献标志码：

基金项目:国家自然科学基金(51373052)

作者	单位	E-mail
刘伟兴	华东理工大学材料科学与工程学院, 上海先进聚合物材料重点实验室, 超细材料制备与应用教育部重点实验室, 上海 200237
李猛猛	华东理工大学材料科学与工程学院, 上海先进聚合物材料重点实验室, 超细材料制备与应用教育部重点实验室, 上海 200237
占鹏飞	华东理工大学材料科学与工程学院, 上海先进聚合物材料重点实验室, 超细材料制备与应用教育部重点实验室, 上海 200237
管涌	华东理工大学材料科学与工程学院, 上海先进聚合物材料重点实验室, 超细材料制备与应用教育部重点实验室, 上海 200237	yguan@ecust.edu.cn
郑安呐	华东理工大学材料科学与工程学院, 上海先进聚合物材料重点实验室, 超细材料制备与应用教育部重点实验室, 上海 200237	zan@ecust.edu.cn

Author Name	Affiliation	E-mail
LIU Wei-xing	Shanghai Key Laboratory of Advanced Polymeric Materials, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China
LI Meng-meng	Shanghai Key Laboratory of Advanced Polymeric Materials, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China
ZHAN Peng-fei	Shanghai Key Laboratory of Advanced Polymeric Materials, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China
GUAN Yong	Shanghai Key Laboratory of Advanced Polymeric Materials, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China	yguan@ecust.edu.cn
ZHENG An-na	Shanghai Key Laboratory of Advanced Polymeric Materials, Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, China	zan@ecust.edu.cn

引用本文：
刘伟兴,李猛猛,占鹏飞,管涌,郑安呐.通过自动加速效应的调控反应挤出制备聚甲基丙烯酸甲酯[J].功能高分子学报,2016,29(2):207-212.
LIU Wei-xing,LI Meng-meng,ZHAN Peng-fei,GUAN Yong,ZHENG An-na.Preparation of PMMvia Reactive Extrusion by Regulating the Trommsdorff Effect[J].Journal of Functional Polymers,2016,29(2):207-212.

用微信扫一扫