###
DOI:
功能高分子学报:2009,(2):183-187
本文二维码信息
码上扫一扫!
功能化SEBS的制备与结构
(1.中国科学院长春应化所高分子物理与化学国家重点实验室;2.中国科学院研究生院)
Preparation and Structure of Functionalized SEBS
摘要
图/表
参考文献
相似文献
本文已被:浏览 2170次   下载 2858
投稿时间:2008-11-05    
中文摘要: 采用熔融反应接枝的方法将(3-异氰酸酯基-4-甲基)苯氨基甲酸-2-丙烯酯(TAI)引入到聚苯乙烯-b-聚(乙烯-co-丁烯)-b-聚苯乙烯三嵌段共聚物(SEBS)上,以实现SEBS的功能化。以傅里叶红外光谱(FT-IR)、核磁共振波谱(NMR)、凝胶渗透色谱(GPC)、动态力学分析(DMA)等手段对接枝物进行了表征。研究了引发剂、单体用量对接枝率及熔体流动速率的影响。结果表明:单体TAI的自聚倾向低,已成功接枝到SEBS上,接枝后的SEBS分子量高且分子量分布宽,接枝后聚(乙烯-co-丁烯)段的玻璃化转变温度提高。
中文关键词: SEBS  异氰酸酯  功能化  熔融接枝
Abstract:The styrene-b-(ethylene-co-1-butene)-b-styrene triblock copolymer (SEBS) was functionalized with allyl(3-isocyanate-4-tolyl) carbamate (TAI) via melting free radical grafting. The modified SEBS was characterized with Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), gel permeation chromatography (GPC) and dynamic mechanical analysis (DMA). The effect of monomer and initiator concentrations on the grafting degree and melt flow rate was evaluated. The results showed that TAI had low tendency of homopolymerization and was successfully grafted onto SEBS molecule chain. The modified SEBS has high weight average molecular weight (Mw) and wide molecule weight distribution (MWD) and high glass transition temperature.
文章编号:     中图分类号:    文献标志码:
基金项目:国家自然科学基金资助项目(NSFC 50390090;50833005)
Author NameAffiliationE-mail
  lgyin@ciac.jl.cn 
   
   
  yinjh@ciac.jl.cn 
引用本文:
尹立刚,刘焱龙,柯卓,殷敬华.功能化SEBS的制备与结构[J].功能高分子学报,2009,(2):183-187.
.Preparation and Structure of Functionalized SEBS[J].Journal of Functional Polymers,2009,(2):183-187.